Beckhoff TwinSAFE EL6900 - Fig. 21 Selection of the Desired Function Block; Fig. 20 Appending a Function Block; Append a Function Block

Operation
EL690040 Version: 3.1.0
5.3.9 Append a function block
The TwinSAFE Logic terminal features function blocks like Emergency Stop, Machine Monitoring, AND, OR,
Decoupler, Operation Mode, etc.
A function block is added by right-clicking on the corresponding TwinSAFE Function Block List in the tree
structure and selecting Append Function Block with the left mouse button in the dialog box that opens (see
figure).
Fig.20: Appending a function block
The required function block can then be selected from the following window.
Fig.21: Selection of the desired function block