Beckhoff TwinSAFE EL6900 User Manual

Notes on the documentation
EL6900 7Version: 3.1.0
1.2 Documentation issue status
Version Comment
3.1.0
• In chapter Technical data [}21] corrosive gas test and footnote for corrosive environment
added
3.0.0
• Foreword changed to Notes on the documentation [}5] and For your safety [}11]
• In chapter Technical data [}21] download link for the certificates added
• Service life [}61] postponed
• Maintenance and cleaning [}62] and Decommissioning [}63] adapted
• Appendix adapted and expanded
2.3.0 • Specification of overvoltage category added
• Protection class III (SELV/PELV) added
• Device type "Open equipment" added
• Link in chapter Actuality updated
• Certificate updated
2.2.0 • Description to diagnostic object F100
hex
added
2.1.1 • Technical data for permissible air pressure extended
2.1.0 • Chapter on Address settings on TwinSAFE terminals with 1023 possible addresses updated
• Description of the user management extended
• Links in the technical data corrected
• TwinSAFE Loader added
2.0.0 • Migration and structural adaptation
• Reliability document updated
• Safety parameters updated
• Foreword revised
1.5.2 • Reliability document updated
• Reaction times added
1.5.1 • Certificate updated
1.5.0 • Company address changed
• Safety parameters extended
1.4.0 • Extended temperature range added
• Notes regarding temperature measurement and EMC added
• Description of date code extended
1.3.1 • Document origin added
1.3.0 • Notes regarding system limits added
1.2.1 • Reference to EN60068-2-29 removed
1.2.0 • ATEX notes added
• Installation position and minimum distances extended
• Notes regarding overvoltage protection added
• Diagnostic object 0xFA00 described
1.1.0 • Minor amendments for EtherCAT
• Copyright and disclaimer modified
• Support and service addresses updated
1.0.0 • First released version

Beckhoff TwinSAFE EL6900 Specifications

General

Brand	Beckhoff
Model	TwinSAFE EL6900
Category	Network Hardware
Language	English