Need help?Do you have a question about the Beckhoff TwinSAFE EL6900 and is the answer not in the manual?
General| Product Name | TwinSAFE EL6900 |
|---|---|
| Category | Network Hardware |
| Product type | Safety Logic Terminal |
| Communication Protocol | EtherCAT |
| Communication Interface | EtherCAT |
| Safety Integrity Level | SIL 3 |
| Performance Level | PL e |
| Supply voltage | 24 V DC |
| Power Supply | 24 V DC |
| Operating Voltage | 24 V DC (-15 %/+20 %) |
| Protection Class | IP20 |
| EtherCAT features | Distributed Clocks |
| Safety Standard | IEC 61508 |
| Operating Temperature | -25...+60 °C |
| Storage Temperature | -25 °C to +85 °C |
| Relative Humidity | 95 %, no condensation |
| Certifications | CE, UL |
Required technical knowledge and skills for operating the product.
General safety guidelines, warnings, and explanation of symbols used in the document.
Contact information and resources for technical assistance, training, and service.
Operator responsibilities and requirements for safe operation of the TwinSAFE component.
Explanation of safety pictograms found on Beckhoff products and their meaning.
Essential safety precautions to follow before, during, and after product operation.
Overview of the Beckhoff Bus Terminal system architecture and components.
Detailed description of the EL6900 TwinSAFE Logic Terminal and its key features.
Comprehensive technical specifications and safety figures relevant for safety-critical applications.
Guidelines for transporting, storing, and operating the TwinSAFE components under specified conditions.
Procedures for installing, wiring, and connecting TwinSAFE components within the system.
Explanation of typical and worst-case response times for TwinSAFE safety functions.
Step-by-step guide on configuring TwinSAFE components using TwinCAT automation software.
Information on diagnosing terminal status and errors using LEDs and diagnostic objects.
Information on designed service life, maintenance, and cleaning guidelines for TwinSAFE terminals.
Instructions for the correct disposal of TwinSAFE components and returning them to the vendor.
Information regarding data retention on volatile and non-volatile components.
Details on EC type examination certificates and the EC Declaration of Conformity.
To Next Page