Bego Miditherm 200 MP - Settings

44
85817 BA-en/12 306.01269…/307.00804…
English ⋅ Miditherm MP
en
Settings
Date and time
1. When switching on, keep button
depressed:
display shows "P1" (after approx. 3 seconds)
and an acoustic signal sounds.
2. Set weekday with buttons:
1 = Monday, 2 = Tuesday, … , 7 = Sunday.
3. Press button to call up "P2" and set time
(hours) with buttons.
4. Press button to call up "P3" and set time
(minutes) with buttons.
5. Press button 4 times:
Display shows the current furnace temperature
(after approx. 7 seconds). "Date and time"
setting is finished.
P1 = weekday setting
P2 = time setting (hours)
P3 = time setting (minutes)
NOTE
The time must be set after installation and when
changing between summer and winter daylight
saving time.
NOTE
• For setting P4 (acoustic signal) and P5 (cutout
temperature of the suction extraction unit)
→ page 45.
• P6 has no function.