Bego Nautilus T User Manual

English ⋅ Nautilus
®
CC plus ⋅ Nautilus
®
T
77
86105 BA-en/00
en
Changing the air filter
You know that the air filter is soiled when the
pressure values during the preheating and melting
processes are no longer reached.
1. Switch the device off and pull out the mains
plug.
2. Remove the cover (1) on the left side (loosen
the slotted screws).
3. Open the acrylic glass screw connection (2) by
turning it and clean the air filter seat.
4. Replace the dirty air filter.
5. Install acrylic glass screw connection and
tighten it.
Request transport packaging
1. For safe transport in case the device needs to
be shipped for service purposes, the proper
transport packaging (REF 17909) should be
requested from BEGO.
+49 421 2028-274
2. For proper packaging of the device see page
7.

Bego Nautilus T Specifications

General

Brand	Bego
Model	Nautilus T
Category	Dental equipment
Language	English