Need help?Do you have a question about the BEHR S5 and is the answer not in the manual?
Warning about electrical hazards and precautions to avoid electric shock.
Caution regarding potential injury from breaking glass and necessary safety measures.
Advisory on risks of burns and injuries, especially with corrosive substances.
Alert that reaction vessels can become hot and cause burns.
Specifies maximum allowable humidity and room temperature for safe operation.
Detailed list of all components included with the behr S5 steam distillation apparatus.
Guidelines for operating the apparatus under normal lab conditions and water supply requirements.
Identification of various ports and vents on the rear side of the behr S5 apparatus.
Details on connecting the various hoses and tubing to the specified nipples on the rear.
Information on connecting power cables, titrators, and other electronic devices to the S5.
Instructions on positioning the apparatus on a stable bench top with access to utilities.
Step-by-step guide for correctly connecting all necessary hoses and tubing to the apparatus.
Procedure for connecting the S5 and titrator to the mains power supply, ensuring voltage compatibility.
Guidance on preparing and calibrating the pH electrode for accurate measurements.
Explanation of the labels and components shown in the front view diagram of the S5.
Steps before turning on, including filling reagent containers and ensuring cooling water supply.
Instructions on opening the water tap to ensure proper cooling water flow for operation.
Guide to turning on the main switch and observing the initialization process on the display.
Explanation of how to use the single control knob for navigation and operation of the S5.
Introduction to the main menu and selecting program options for distillation.
Procedure for priming delivery pumps and tubing with reagents before first use or after disuse.
Guidance on performing an initial 'warm-up' distillation for reliable results and system check.
Steps for properly inserting the sample vessel into the apparatus for distillation.
Procedure for powering on the distillation apparatus and navigating to the main menu.
Instructions for powering on the connected titrator and entering sample data.
How to pause or cancel an ongoing distillation program using the control knob.
Steps to safely conclude an automatic distillation process and remove the sample vessel.
Step-by-step guide for controlling distillation parameters manually via the interface.
Procedure for safely stopping and concluding a manually controlled distillation process.
Instructions for properly storing the pH electrode to maintain its functionality during idle periods.
Procedure for flushing reagent lines with distilled water to prevent deposits and ensure readiness.
Method for verifying steam output and identifying potential blockages using a test program.
How to test the accuracy of reagent pump deliveries using specific test programs.
Procedure for cleaning the NaOH lines with diluted hydrochloric acid to remove deposits.
Guidance on opening maintenance doors to inspect internal components and connections.
Option to select the display language for the apparatus interface.
How to enable or disable the reagent and waste canister level sensors.
Method for adjusting the internal clock of the apparatus.
Choosing the correct titration unit connected to the S5 for integrated operation.
Configuring how the cooling water is supplied, either from a tap or a cooler.
Procedure for setting the current date on the apparatus.
Instructions on how to view real-time operating status information on the display.
Comprehensive guide to interpreting and resolving various error messages displayed by the S5.
Description of the initial screens displayed when the apparatus is powered on.
General| Brand | BEHR |
|---|---|
| Model | S5 |
| Category | Distilling equipment |
| Language | English |
To Next Page