Behringer NX Series - Page 29

58 NX Series
Specications
NX6000D NX6000 NX4-6000 NX3000D
Maximum Output Power
Stereo / 4-channel
2 Ω per channel, stereo
— 4 x 1600 W 2 x 1500 W
4 Ω per channel, stereo
2 x 3000 W 4 x 860 W 2 x 900 W
8 Ω per channel, stereo
2 x 1600 W 4 x 440 W 2 x 440 W
Bridge connection
4 Ω
— 2 x 3000 W 3000 W
8 Ω
— 2 x 1600 W 1500 W
Controls
Front Power switch, Gain controls
(channels A and B),
DSP section rotary push-encoder
Buttons for Process, Setup,
Up/Down, Exit
Power switch
Gain controls (channels A and B)
Power switch
Gain controls
(channels A,B,C and D)
Power switch, Gain controls
(channels A and B),
DSP section rotary push-encoder
Buttons for Process, Setup,
Up/Down, Exit
Rear
Circuit breaker
Mode switch (stereo / mono)
Crossover switch
(LF / fullrange / HF)
Circuit breaker
2 x Mode switch
(bridge / stereo / mono)
2 x Crossover switch
(LF / fullrange / HF)
Circuit breaker
—
Indicators
Power Amber backlit LCD display Amber LED Amber backlit LCD display
Limit (per channel) 0 dB LED
Signal (per channel) -40 / -6 / -3 dB LEDs
Protect (per channel) Red LED
Input Sensitivity
For rated power into 4 Ω 0.775 V (0 dBu)
Digital Signal Processing (DSP)
Display LCD 128 x 32, amber backlit — LCD 128 x 32, amber backlit
Digital delay function
(per channel)
0 – 300 ms — 0 – 300 ms
Digital crossover function 3 lter types, up to 48 dB/octave — 3 lter types, up to 48 dB/octave
Digital EQ function
(per channel)
8-band parametric,
2-band dynamic equalizer
—
8-band parametric,
2-band dynamic equalizer
Digital dynamics function
(per channel)
Zero attack limiter (peak) — Zero attack limiter (peak)
Presets 20 total presets,
19 user-denable
—
20 total presets,
19 user-denable