Behringer NX Series - Page 30

Quick Start Guide 59
NX6000D NX6000 NX4-6000 NX3000D
System
Inputs 2 x combo jacks 4 x combo jacks 2 x combo jacks
Input impedance 10 k unbalanced, 20 k balanced
Outputs
2 x locking-style professional speaker connectors
4 x locking-style professional
speaker connectors
2 x locking-style professional
speaker connectors
Output circuit type Class D
Distortion <0.2% <0.1% <0.2% <0.3%
Frequency response 20 Hz to 20 kHz, +0 / -2 dB 20 Hz to 20 kHz, +0 / -1 dB
Damping factor >140 @ 8  >145 @ 8 
Signal-to-noise >100 dB
USB Rear panel USB connector type B
for remote control of DSP section
—
Rear panel USB connector type B
for remote control of DSP section
Circuit Protection
Cooling Continuously variable speed fan
Back-to-front air ow
Amplier protection Thermal and DC protection
Stable into reactive or mismatched loads
Load protection On/o muting, DC-fault power supply shutdown
Power Supply, Voltage, Current Consumption (Breaker / Fuses)
USA / Canada
120 V~, 60 Hz, (T 25 A H 250 V)
100-120 V~, 50/60 Hz,
(T 10 A H 250 V)
Japan
100 V~, 50/60 Hz, (T 25 A H 250 V)
100-120 V~, 50/60 Hz,
(T 10 A H 250 V)
UK / Australia / Europe
220-240 V~, 50/60 Hz, (T 12 A H 250 V)
220-240 V~, 50/60 Hz,
(T 6.3 A H 250 V)
Korea / China
220-240 V~, 50/60 Hz, (T 12 A H 250 V)
220-240 V~, 50/60 Hz,
(T 6.3 A H 250 V)
Power consumption @ 2 ,
⁄ rated power
— 620 W 350 W
Power consumption @ 4 ,
⁄ rated power
620 W 620 W — —
Mains connector Standard IEC receptacle
Dimensions / Weight
Dimensions (H* x W x D)
94 x 483 x 316 mm (3.7 x 19.0 x 12.4")
94 x 483 x 231 mm
(3.7 x 19.0 x 9.1")
Weight 6.0 kg (13.2 lbs) 5.9 kg (13.0 lbs) 6.1 kg (13.4 lbs) 3.6 kg (7.9 lbs)
* including 5 mm rubber feet