Behringer NX Series - Page 31

60 NX Series
NX3000 NX1000D NX1000
Maximum Output Power
Stereo / 4-channel
2 Ω per channel, stereo
2 x 1500 W 2 x 500 W
4 Ω per channel, stereo
2 x 900 W 2 x 300 W
8 Ω per channel, stereo
2 x 440 W 2 x 160 W
Bridge connection
4 Ω
3000 W 1000 W
8 Ω
1500 W 620 W
Controls
Front
Power switch Gain controls
(channels A and B)
Power switch, Gain
controls (channels A and B),
DSP section rotary push-encoder Buttons
for Process, Setup, Up/Down, Exit
Power switch
Gain controls
(channels A and B)
Rear Mode switch(bridge / stereo / mono)
Crossover switch (LF / fullrange / HF)
—
Mode switch(bridge / stereo / mono)
Crossover switch (LF / fullrange / HF)
Indicators
Power Amber LED Amber backlit LCD display Amber LED
Limit (per channel) 0 dB LED
Signal (per channel) -40 / -6 / -3 dB LEDs
Protect (per channel) Red LED
Input Sensitivity
For rated power into 4 Ω 0.775 V (0 dBu)
Digital Signal Processing (DSP)
Display — LCD 128 x 32, amber backlit —
Digital delay function (per channel) — 0 – 300 ms —
Digital crossover function — 3 lter types, up to 48 dB/octave —
Digital EQ function (per channel)
—
8-band parametric,
2-band dynamic equalizer
—
Digital dynamics function
(per channel)
— Zero attack limiter (peak) —
Presets — 20 total presets, 19 user-denable —
Specications