Behringer NX Series - Page 32

Quick Start Guide 61
NX3000 NX1000D NX1000
System
Inputs 2 x combo jacks
Input impedance 10 k unbalanced, 20 k balanced
Outputs 2 x locking-style professional speaker connectors
Output circuit type Class D
Distortion <0.05% <0.1% <0.05%
Frequency response 20 Hz to 20 kHz, +0 / -1 dB
Damping factor >145 @ 8  >155 @ 8 
Signal-to-noise >100 dB
USB
—
Rear panel USB connector type B for
remote control of DSP section
—
Circuit Protection
Cooling Continuously variable speed fan
Back-to-front air ow
Amplier protection Thermal and DC protection Stable into reactive or mismatched loads
Load protection On/o muting, DC-fault power supply shutdown
Power Supply, Voltage, Current Consumption (Breaker / Fuses)
USA / Canada / Japan 100-120 V~, 50/60 Hz, (T 10 A H 250 V) 100-120 V~, 50/60 Hz, (T 6.3 A H 250 V)
UK / Australia / Europe 220-240 V~, 50/60 Hz, (T 6.3 A H 250 V) 220-240 V~, 50/60 Hz, (T 3.15 A H 250 V)
Korea / China 220-240 V~, 50/60 Hz, (T 6.3 A H 250 V) 220-240 V~, 50/60 Hz, (T 3.15 A H 250 V)
Power consumption @ 2 ,
⁄ rated power
350 W 150 W
Mains connector Standard IEC receptacle
Dimensions / Weight
Dimensions (H* x W x D) 94 x 483 x 231 mm (3.7 x 19.0 x 9.1")
Weight 3.5 kg (7.7 lbs) 3.4 kg (7.5 lbs) 3.3 kg (7.3 lbs)
* including 5 mm rubber feet