Behringer NX4-6000 - Technical Specifications

38 NX6000/NX3000/NX1000/NX4-6000/NX6000D/NX3000D/NX1000D
Specifications
NX6000D
NX6000
NX4-6000
NX3000D
Stereo/4-channel
Maximum Output Power
20 per channel, stereo
—
4x1600W 2X1500W
40 per channel, stereo
2x3000W
4x860W 2x900W
80 per channel, stereo
2x1600W
4x440W 2x440W
Bridge connection
40
—
2x3000W 3000 w
80
—
2x1600W 1500 W
[ Controls
Front
Power switch, Gain controls
(channels A and B),
DSP section rotary push-encoder
Buttons for Process, Setup,
Up/Down, Exit
Power switch
Gain controls (channels A and B)
Power switch
Gain controls
(channels A,B,C and D)
Power switch, Gain controls
(channels A and B),
DSP section rotary push-encoder
Buttons for Process, Setup,
Up/Down, Exit
Rear
Circuit breaker
Mode switch (stereo / mono)
Crossover switch
(LF/fullrange/HF)
Circuit breaker
2 x Mode switch
(bridge/stereo/mono)
2 x Crossover switch
(LF/fullrange/HF)
Circuit breaker
[ Indicators
Power
Amber backlit LCD display
Amber LED
Amber backlit LCD display
Limit (per channel)
OdBLED
Signal (per channel)
-40 / -6 / -3 dB LEDs
Protect (per channel)
Red LED
r 1
Input Sensitivity
For rated power into 40
0.775 V(0dBu)
Digital Signal Processing (DSP)
Display
LCD 128x32, amber backlit —
LCD 128x32, amber backlit
Digital delay function
(per channel)
0-300 ms
—
0 - 300 ms
Digital crossover function
3 filter types, up to 48 dB/octave
—
3 filter types, up to 48 dB/octave
Digital EQ function
(per channel)
8-band parametric,
2-band dynamic equalizer
—
8-band parametric,
2-band dynamic equalizer
Digital dynamics function
(per channel)
Zero attack limiter (peak)
—
Zero attack limiter (peak)
Presets 20 total presets,
19 user-definable
—
20 total presets,
19 user-definable