Behringer PRO-800 - Specifications

80 81Quick Start GuidePRO-800
Specications
Synthesizer Architecture
Number of voices 8
Type of oscillators 2 x 3340 per voice
Type Analog
Oscillators 16 (32.70 Hz to 8372.02 Hz across 4 ranges)
LFO 1 (0.08 Hz to 20 Hz)
VCF 1 x 4-pole low pass (24 dB/oct. slope)
Envelopes VCF, VCA
Connectivity
Output ¼" TS, unbalanced, max. +5.0 dBu
Audio out ⁄" TS, unbalanced, max. +20.0 dBu
Footswitch ¼" TS, unbalanced
Headphones ⁄" TRS, unbalanced, max. 7.5 mW @ 32 Ohm
Headphones output impedance 8 
MIDI In Out/Thru 2 x 5-pin DIN/ 16 channels
USB (MIDI) USB 2.0, type B
Sync in TS 3.5 mm 1PPS, 2PPQ, 24PPQ, 48PPQ
Fliter CV IN TS 3.5 mm 0 V to +10 V
USB
Type Class compliant USB 2.0, type B
Supported operating systems Windows 7 or higher/ Mac OS X 10.11.6 or higher
Program Section
Display 4 number, 8-segment display
Buttons
0 – 9 program select
Preset, perf, settings, tune
Sync source, sync clock, rec
SEQ 1, SEQ 2, ARP UP-ON, Arp Assign.
Control Value encoder
Oscillator Section
Controls
Frequency (OSC A & B): -5 to +5
Level (OSC A & B) 0 to 10
Pulse Width (OSC A & B) 0 to 10
Fine (OSC B only)
Switches
Shape (OSC A & B): Sawtooth, Triangular and Pulse
OSC A sync: on/o
POLY-MOD Section
Controls
FIL ENV 0 to 10
OSC B S 0 to 10
Switches
Freq A destination
Filter destination
Control Noise level 0 to 10
Controls
Frequency 0 to 10
Initial amount 0 to 10
Switches
Shape: Triangle or Pulse
Freq A-B
PW A-B
Filter
Controls Rate: 0 to 10
Controls
Cuto frequency: 0 to 10
Resonance: 0 to 10
Envelope amount: 0 to 10
Attack: 0 to 10
Decay: 0 to 10
Sustain: 0 to 10
Release: 0 to 10
Switch KYBD amount: o, ½, FULL
Noise Section
LFO-MOD Section
Glide Section
Filter Section