Behringer PRO-800 - PRO-800 Getting Started; Connection; Software Setup; Hardware Setup

36 37
Quick Start GuidePRO-800
(EN) Step 3: Getting started
PRO-800 Getting started
OVERVIEW
This ‘getting started’ guide will help you set up the PRO-800
and briey introduce its capabilities.
CONNECTION
To connect the PRO-800 to your system, please consult
the connection guide earlier in this document.
SOFTWARE SETUP
The PRO-800 is a USB Class Compliant MIDI device, and so no
driver installation is required. The PRO-800 does not require
any additional drivers to work with Windows and MacOS.
HARDWARE SETUP
Make all the connections in your system. Keep the PRO-800
power turned o when making any connections.
Ensure your sound system is turned down.
Turn on the PRO-800 before turning on any power ampliers
and turn it o last. This will help prevent any turn on or turn
o “pops or thumps” in your speakers.
WARM UP TIME
We recommend leaving 15 minutes or more time
for the PRO-800 to warm up before recording or live
performance. (Longer if it has been brought in from
the cold.) This will allow the precision analog circuits
time to reach their normal operating temperature and
tuned performance.
FIRMWARE UPDATE
Please check the behringer.com website regularly for any
updates to the Behringer SYNTHTRIBE app.
The app looks for the latest rmware le which can then be
downloaded and used to update the PRO-800.