Switch-mode power supply Autorange 100-240 V (50/60 Hz)
Power consumption 60 W
Standard operating temperature range 5°C – 40°C (41°F – 104°F)
Dimensions 132 x 483 x 287 mm (5.2 x 19 x 11.3″)
Weight 6.5 kg (14.4 lbs)
Other important information
1.Register online. Please register your new
1. Music Tribe equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form
helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized
Fulfiller for your country listed under “Support” at behringer.com. Should your country not be listed, please check if your problem can
be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an
online warranty claim at behringer.com BEFORE returning the product.
3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your
particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
4. AES50. To fully comply with national legislation including (but not limited to) transposition of EC EMC Directive 2004/108/EC by EU
member states and FCC Part
15 for the United States of America, all connections made to Ultranet, Ethernet and AES50 ports A and B on the Behringer X32 must
be made using shielded CAT5/5e or CAT6 cables.
X32 RACK DIGITAL MIXER
complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
Read More About This Manual & Download PDF:
File Downloads
To Next Page
Loading...
