Belden HIRSCHMANN EAGLE40-03 - Page 48

48
Installation EAGLE40
Release 02 08/2020
 Accessories
Note that products recommended as accessories may have different
characteristics to those of the device, which may limit the application
range of the overall system. For example, if you add an accessory with
IP20 to a device with IP65, the IP of the overall system is reduced to IP20.
Note: Operate EAGLE40-07 devices with fiber optic SFP transceivers
only. Copper SFP transceivers are inadmissible.
Name Order number
AutoConfiguration Adapter ACA22-USB (EEC) 942 124-001
AutoConfiguration Adapter ACA21-USB (EEC) 943 271-003
6-pin terminal block (50 pieces) for supply voltage 943 845-013
2-pin terminal block (50 pcs.) for signal contact and input 943 845-010
Industrial HiVision Network Management Software 943 156-xxx
Gigabit Ethernet SFP transceiver Order number
M-SFP-TX/RJ45
a
a. Only suitable for EAGLE40-03 devices.
943 977-001
M-SFP-TX/RJ45 EEC
a
942 161-001
The following operating conditions apply to twisted pair transceivers:
 Usable with:
- HiOS as of software version 03.0.00
- Classic Switch software, as of software version 04.1.00.
- HiSecOS as of software version 01.2.00
Do not use with the following devices:
- SPIDER II- MSP/MSM
- EES
 Longer RSTP switching times and link loss detection times compared to twisted pair ports
provided by the device directly.
 Not applicable for combo and Fast Ethernet ports.
 Only support of the autonegotiation mode including autocrossing.
M-SFP-SX/LC 943 014-001
M-SFP-SX/LC EEC 943 896-001
M-SFP-MX/LC EEC 942 108-001
M-SFP-LX/LC 943 015-001
M-SFP-LX/LC EEC 943 897-001
M-SFP-LX+/LC 942 023-001
M-SFP-LX+/ LC EEC 942 024-001
M-SFP-LH/LC 943 042-001
M-SFP-LH/LC EEC 943 898-001
M-SFP-LH+/LC 943 049-001
M-SFP-LH+/LC EEC 942 119-001
SFP-GIG-LX/LC
b
b. Further information on certifications can be found on the Internet at the Hirschmann product
pages (www.hirschmann.com).
942 196-001
SFP-GIG-LX/LC EEC
b
942 196-002