Belkin AC1200 DB User Manual

42
USING YOUR ROUTER
Resetting the Router
Reset Button – Red
The “Reset” button is used in rare cases when the Router may function
improperly. Resetting the Router will restore the Router’s normal operation
while maintaining the programmed settings. You can also restore the
factory default settings by using the “Reset” button. Use the restore
option in instances where you may have forgotten your custom password.
Resetting the Router
Push and release the “Reset” button. The lights on the Router will
momentarily flash. The “Router” light will begin to blink. When
the “Router” light becomes solid again, the reset is complete.
Restoring Your Router to Factory Defaults
Press and hold the “Reset” button for at least 10 seconds,
and then release it. The lights on the Router will momentarily
flash. The “Router” light will begin to blink. When the “Router”
light becomes solid again, the restore is complete.

Belkin AC1200 DB Specifications

General

Wireless Standard	IEEE 802.11ac
Frequency Bands	2.4 GHz, 5 GHz
Max Data Rate	1200 Mbps
Ports	1 x Gigabit WAN, 4 x Gigabit LAN, 1 x USB 2.0
Security	WPA, WPA2
Antennas	2 external antennas