EasyManuals Logo

Belkin AC1200 DB User Manual

Belkin AC1200 DB
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
47
TROUBLESHOOTING, SUPPORT, AND WARRANTY
Troubleshooting
The Setup CD does not automatically start.
If Belkin Setup does not run when you insert the CD-ROM, your
computer may not be configured to open CDs automatically.
If Belkin Setup does not appear within 15 seconds, browse to your
CD-ROM drive and open the “Belkin Setup” icon. Alternatively, you may
visit http://router/ and perform the setup manually. Please see “Manual
Setup Using Your Browser” earlier in this manual for more information.
Belkin Setup cannot find my Router.
If Belkin Setup is not able to communicate with your Router during
the installation process, please check the following items.
1. Make sure that the wireless hardware on your
computer is turned on, if available.
2. Try connecting your computer to one of the four “wired
ports on the Router with an Ethernet cable.
3. Ensure that the Router is on. The front-panel light should be on.
4. Unplug the Router’s power supply for 10 seconds, then plug it back in.
5. There may be firewall software on your computer preventing
an outgoing connection. You may choose to temporarily
disable this software before attempting setup.
If Belkin Setup still cannot find the Router, you might choose
to do a manual setup. Refer to “Manually Configuring
Network Settings” in this manual for details.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Belkin AC1200 DB and is the answer not in the manual?

Belkin AC1200 DB Specifications

General IconGeneral
Wireless StandardIEEE 802.11ac
Frequency Bands2.4 GHz, 5 GHz
Max Data Rate1200 Mbps
Ports1 x Gigabit WAN, 4 x Gigabit LAN, 1 x USB 2.0
SecurityWPA, WPA2
Antennas2 external antennas

Related product manuals