When Using Your Cooker
Please be aware of the following when using your oven and / or grill.
The use of a gas cooker results in the production of heat and moisture in
the room it is installed in. Ensure the kitchen is well ventilated:
Keep natural ventilation holes open, or install a mechanical device
(Extractor fan / hood).
Prolonged intensive use of the appliance may call for additional ventilation,
for example opening a window, or more effective ventilation eg. increasing
the level of mechanical ventilation.
Condensation
When hot and cold air meet, condensation forms. The outer door is air cooled
and the inner door gets hot, so some condensation might form; this is normal and
will disappear within 10 - 15 minutes.
For your safety
This appliance has a built in safety device to isolate the gas and electric
supplies to various components in the event of fan failure.
If the programmer/clock and lights do not function, and the ignition system
stops working, the safety device has operated. Within an hour, the safety
device will reset itself and the programmer /clock display will flash.
To reset the programmer/clock, simply press and hold in the cook time and
ready time buttons, and set the time of day within 5 seconds by pressing the
“+” plus and “-” minus buttons.
Cooling fan
The cooling fan helps to keep the exterior cool during normal use. When a
burner is operated, you should hear the cooling fan switch on automatically
and be able to feel air coming from the appliance vents just below the fascia.
The cooling fan will continue to operate for approximately 10 minutes after
turning off the burners. This is normal.
If there is no such indication that the fan is operating, the appliance will
require servicing.
Do not use the appliance until it has been serviced.
Switch the appliance off at the mains and contact Customer Care.
14
To Next Page
Loading...
