Belling 600G - Getting Started

Using Your Main Oven
Getting started
The main oven may be controlled by the programmer, either on its own or with
the top oven (see The Programmer/Clock for details). The programmer must be
set to manual before it can be used, or programmed.
Switching on the oven
l For the Stoves 600G & Belling XOU60G:
Instead of turning the control knob towards the grill setting, turn it to gas
mark 9. The oven burner will automatically ignite, then select the gas mark
you require.
l For the Stoves 700GDO, 900GDO & Belling XOU70G & XOU90G:
Use the oven control knob and turn it to gas mark 9. The oven burner will
automatically ignite, then select the gas mark you require.
l It can take up to 60 seconds for the burner to come on to the full rate.
l As this is a conventional oven, the centre of the cavity will be the temperature
you have selected. The top of the cavity will be slightly hotter, and the
bottom slightly cooler.
l As with the grill, the cooling fan will come on as soon as the top oven is turn
on, and it continues to run for around 10 minutes after use.
l Should the oven burner be accidentally extinguished, it will automatically re-
ignite.
l To turn off the top oven, simply turn the control knob back to the ‘l ‘
position.
25