Setting the Programmer
Semi - Automatic Cooking
The Duration method
u Press the Function button twice, which will skip past the
Minute Minder.
u The display will flash the word ‘dur’, and the ‘A’ will flash
on the left hand side of the display.
u Use the Up / Plus and Down / Minus buttons to set the
length of time you want to cook for. This must be done with-
in 5 seconds or the time of day will show again.
Once this is done the oven will automatically switch off
once the time has elapsed, and the alarm will sound.
To switch off the alarm, press any button. To view any
remaining time press the function button twice.
The End Time method
u Press the Function button three times, which will skip
past the Minute Minder and the Duration programmer.
u The display will flash the word ‘End’ and the ‘A’ will flash
on the left hand side of the display.
u Use the Up / Plus and Down / Minus buttons to select the time
the oven is required to turn off.
Once this is done the oven will turn itself off at the time
you have selected.
To switch off the alarm, press any button.
Important: Once the oven has switched itself
off please make sure you turn to oven controls to
the ‘off’ position and set the oven to manual by
pressing the Cook Time and Ready Time buttons
together.
To Next Page
Loading...
