Setting the Programmer
Fully Automatic Cooking (example)
This programming method is best suited for when a delayed start time is required.
Unlike the semi automatic methods this requires both the duration and the end
time to be entered. The timer will work out the start time and begin cooking.
u Press the function button twice to select the length of
time your food will need.
u The ‘A’ on the left hand side will flash and the ‘dur’ message
will flash up.
u Using the Up / Plus and Down / Minus buttons set the
time you require within 5 seconds of the ‘dur’ message.
The automatic cooking symbol will appear to
show that the oven is no longer in manual
mode but is in automatic mode
.
To Next Page
Loading...
