Installing Your Cooker
This appliance shall be installed in accordance with the regulations in force and only used
in a well ventilated space. Read the instructions before installing and using this appliance.
These instructions are only valid if the country symbol appears on the appliance. If the sym-
bol does not appear on the appliance, it is necessary to refer to the technical instructions
which will provide the necessary instructions concerning modification of the appliance to the
conditions of use of the country.
Prior to installation, ensure that the local distibution conditions (nature of the gas and gas
pressure) and the adjustment of the appliance are compatible.
The adjustment conditions for this appliance are stated on the data badge - located on the
rear of the appliance.
This appliance is not connected to a combustion products evacuation device. It shall be
installed and connected in accordance with current installation regulations. Particular atten-
tion shall be given to the relevant requirements regarding ventilation.
36
UK Regulations & Standards
always refer to the most recent issue of the standards
l Gas Safety Regulations.
l Building Regulations - issued by the Department of the Environment.
l Building Standards (Scotland) (Consolidated) - issued by the Scottish
Development Department.
l I.E.E. Wiring Regulations.
l Electricity at Work Regulations.
l BS 6172 Installation of Domestic Gas Cooking. For LP Gas, refer to BS 5482 Part
1, Part 2 or Part 3 as relevant.
l Installation and Servicing Instructions for this appliance.
For installation in countries other than the UK, the appliance must be
connected in accordance with all local gas and electrical regulations. In the
Republic of Ireland installers should refer to IS 813 Domestic Gas Appliances.
To Next Page
Loading...
