Main Oven – Top & Base Heat
The oven is heated by two elements, one at the top of the oven and the
other underneath the floor of the oven.
To heat the oven, turn the main oven selector switch to the required
function. The oven light will come on. Then turn the oven temperature
control to the required temperature.
The oven indicator light will immediately come on and remain on until
the oven reaches the set temperature. This light will then automatically
go on and off during cooking as the oven thermostat maintains the
correct temperature.
Food should not be placed on the floor of the oven.
This function can be used automatically as well as in the manual mode.
Operation
30
To Next Page
Loading...
