Belling BDO9608BK - Cooking Modes and Management

24
11 FUNCTION MODEL
Modication of the assigned default cooking temperature
The temperature setting on the temperature display can be changed by touching the
key. The temperature display starts to ash. To set the desired value use or in 5
degree steps.
Note: to replace the default temperature setting for this function with this tempera-
ture set permanently, touch for approximately 5 seconds, until a beep is heard.
The factory-set default temperature for this function is now permanently changed.
Manual cooking
Once a function has been selected, touching the key, cooking begins with a tem-
perature adjustment on the temperature display (if present).
disappears and the cooking time begins to appear on the timer display. Cook-
ing will continue until it is manually terminated by the user or until the maximum per-
mitted cooking time, depending on the selected cooking temperature, has elapsed.
With half and complete automatic cooking, as described below, cooking is automati-
cally terminated according to the parameters entered by the user before cooking
(tapping)
To suspend, modify or terminate cooking
The contact during cooking interrupts the cooking process and
starts ashing, while other parts of the display remain unchanged. All oven and turbo
fan heating elements are temporarily disabled. Cooking is suspended.
To nish cooking, tap again; all the cooking indications on the display disap-
pear. The temperature display will indicate the residual heat, if present (See: indication
of residual heat).
Note: after cooking is nished, touching the key will restore the previous func-
tion and the temperature settings on the screen; with a second tap, it is possible to
start cooking again.
To change the cooking parameters (function, temperature, etc.), use the appropriate
buttons as described in this document. Tapping
will restar
t cooking with the
modied parameters.