25
11 FUNCTION MODEL
Automatic cooking
Automatic cooking means that cooking will end automatically based on the param-
eters of the cooking function and the temperature selected.
Semi-automatic cooking
This method is used to start cooking immediately, entering the desired cooking time.
1) Select the desired function and adjust (if necessary) the temperature as described
earlier in this document.
2) Press the key . At this point will ash on the timer screen.
3) Set the desired cooking time with the and keys.
appears on the status display. (if the duration is increased to 0:00, two
warning beeps will occur).
4) Pressing the key , disappears and cooking starts. The end of cooking
time is shown on the timer display, together with the symbol .
Automatic cooking
This method is used if the food is intended to be ready at a particular future time.
Therefore, this method is also called “delayed cooking”.
1) Perform steps 1 to 3 of the half automatic cooking (setting the cooking time).
2) Press the key again .
ashes on the timer screen together with the current end cooking time.
3) Adjust the desired end time with the e keys .
on the status display disappears, while does not, indicating that de
layed cooking has been programmed and consequently does not start immediately.
4) Press the key , disappears and cooking starts. The end of cooking
time is shown on the timer display, together with the symbol .
During cooking
The 5 bars on the temperature display indicate the actual oven temperature. Each bar
is assigned to one fth of the regulated value. The high-arrow next to the bars ashes
when the heating elements are active at that time.
End of automatic cooking
After
cooking has nished automatically, the temperature display will indicate the re-
sidual heat, if present (See: indication of residual heat),
will ash and will sound
for 7 minutes. Tapping
inter
rupts the sound.
To Next Page
Loading...
