• The upper right of the screen displays the recorded time.
• When the light is insufficient, press the <LEFT\IR LED> button to
turn on the IR; press the <LEFT\LED> button again to turn off.
• Touch on screen to zoom in or out.
Taking still images
1: Set the camcorder to capture mode, the icon appear on the LCD.
2: Zooming:
Press the <Zoom in> or <Zoom out> to zoom in or zoom out.
Alternative: Touch < >\< > on screen to zoom in or out.
3: Hold the camcorder steady and then press the <Rec\Shutter> button to
take a picture.
• When the light is insufficient press the LEFT button to turn on the IR
LED; press the Left\ IR LED button again to turn off.
Using the Self-timer
Use the self-timer to set a delay from the time the shutter button pressed to
the time the image shot.
1: Turn the power on, and set the camcorder to the Capture mode.
2: Press the <OK\Menu> button to display the capture menu, and then
select the items <Self Timer> , and press <OK\Menu> button to
launch the submenu:
Off: Off the self-timer.
To Next Page
Loading...