BELL+HOWELL DNV6HD - MENU IN CAPTURE MODE; MENU IN VIDEO MODE; MENU IN SETUP MODE

16
Press <Playback\Mode> to shift Capture/Recorder/Setup Mode.
When a menu is displayed, the <UP>\<DOWN>\<LEFT>\<RIGHT> and
<OK\Menu> buttons is used to make the desired setting.
Menu in capture mode
1: Turn on the camcorder and set it to capture mode.
2: Press the <OK\MENU> to display the menu, and press the
<LEFT>\<RIGHT>\<UP>\<DOWN> to select the desired menu.
3: Press the <OK\MENU> button to enter the submenu.
4: Use the <LEFT>\<RIGHT>\<UP>\<DOWN> to select the desired item.
5: Press the <OK\MENU> to confirm the setting and exit.
Alternative: You can also use the touch button to operate.
Menu in video mode
1: Turn on the camcorder and set it to record mode.
2: Press the <OK\MENU>to display the menu, and press the
<LEFT>\<RIGHT>\<UP>\<DOWN> to select the desired menu.
3: Press the <OK\MENU> to enter the submenu.
4: Use the <LEFT>\<RIGHT>\<UP>\<DOWN> to select the desired item.
5: Press the <OK\MENU> button to confirm the setting and exit.
Menu in setup mode
You can set the system items in setup menu.