BELL+HOWELL DNV6HD - PLAYING BACK MOVIE CLIPS; PLAYBACK STILL IMAGE

17
1: Turn the power on and press the <Playback\Mode> to display the menu,
and press the <LEFT>\<RIGHT>\<UP>\<DOWN> to select the desired
menu.
2: Press the <OK\MENU> button to enter the submenu.
3: Use the <LEFT>\<RIGHT>\<UP>\<DOWN> buttons to select the desired
item.
4: Press the <OK\MENU> button to confirm the setting and exit.
5. Playback
Playing back movie clips
1: Press the <PLAYBACK\Mode> button to set the camcorder to playback
mode.
2: Press the <LEFT> or <RIGHT> buttons to select the movie clips you
want to playback.
3: Press the <REC\SHUTTER> button to start playing. Press the
<OK\Menu> to pause it and press it again to continue. Press the
<RIGHT> to fast forward and press the <LEFT> to back forward.
4: Press the < Zoom in > or < Zoom out > to adjust the volume.
5: Press the <REC\SHUTTER> again to stop playing.
Playback still image
1: Set the camcorder to playback mode.
The latest capture image appears on the screen. If there is no image