Self-timer 2S: The shutter release delay for 2 seconds.
Self-timer 5S: The shutter release delay for 5 seconds.
Self-timer 10S: The shutter release delay for 10 seconds.
3: Press the <LEFT>\<RIGHT> to select the desired item, and then press
<OK\Menu> to confirm the setting and close the menu.
4: Press the <REC\Shutter> to take picture.
Using the Shooting
Use the shooting to set multi-shooting.
1: Turn the power on, and set the camcorder to the Capture mode.
2: Press the <OK\Menu> button to display the capture menu, and then
select the items <Shooting> , and press the <OK\Menu> button to
launch the submenu:
Single：Press the shutter button once to take one picture.
Continuous: Press the shutter button once to take three pictures continuously.
Panorama: Press the shutter button once to take a panorama picture.
Long Exposure: Press the shutter button to start exposure and press again to this
picture.
4. Using the menu
To Next Page
Loading...