Beltronics RX 65 - Detailed Programming Options

-'Q'failiof- Programming.
Pilot (Power-on indication)
Note: When you are using the Dark mode,
the display will only show lID, AD, or CD,
(Highway-Dark, AutoScan-Dark,
or City-
Dark).
F'i lot. Hb.l'r' (Full description)
In this setting, RX65 will display "Highway,"
"City,"
or "Auto" as its power-on indication.
(factory default)
F'i lot. H(Letter)
In this setting, RX65 will display "H" for
Highway,
"C" for City, and "A" for
AutoScan.
F'i lot. !) (Vehicle voltage)
In this setting, RX65 will continually display
"H" for Highway, "C" for City, and "A" for
AutoScan,
and the vehicle's voltage. If the
vehicle's voltage drops below 10.5 volts, a
low voltage warning is displayed, followed
by an audible alert. A high voltage warning
is also given if the voltage goes above 16.0
volts.
The high-voltage warning is also
followed
by an audible alert.
14
Voice
I.,JOiCEo On (Voice alerts on)
In this setting, all radar, laser, and SWS (if
prograrnmed on) alerts will be
accompanied by a digital voice,
1)0 i CEo I] f f (Voice alerts off)
In this setting, only the audio tones will be
heard during an alert or SWS message.
Power-on Sequence
F'r,I,It"'l]nSTn (Standard)
In this setting, each time you turn on the
RX65, it will display "BEL RX65," "Laser,"
"Ka-band " "K-band " "X-band" "Safety "
, , , ,
and any changes to factory settings. (factory
default)
F'1.,,Ir'l]nP:;T (Fast power-on)
In this setting, the RX65 will only provide a
briefaudible tone,
and will display any non-
factory settings.