Bematech I-3200 - 3 How to Make Settings; 3.2 Setting Scanner with Factory Default Code

3
3 How to make settings
3.1 Setting Warnings
Scanning any barcodes in this manual may affect the setting and programming of the
scanner. Each barcode specified below is for its application to match the end user's needs. All
settings made on the scanner are saved in nonvolatile memory and are retained even after the
scanner is turned off. The settings made will only be deleted when the Restore Factory
Default code is scanned. You may need to hide the codes adjacent to the code you choose so
that they will not be scanned.
3.2 Setting Scanner with Factory Default code
Once the scanner is connected, and setting must be done on the scanner. Follow these steps
for successful settings:
Turn on the scanner
Scan Factory Default code
(2x beeps)
Save Settings to the scanner
automatically