Example, set Suffix string to "END"
1. From the ASCII code character table, the hexadecimal values of the string "END" is
"45", "4E", "44".
2. Confirm that programming of scanner is enabled.
3. Scan "Modify Suffix" barcode.
4. Scan the 8 data setting bardcodes in Appendix B, "4", "5", "4", "E", "4", "4".
5. Scan the "Save Settings" barcode.
Code Identifiers
Adding code identifiers to the output stream allow applications to identify the
symbologies of barcodes read. The single character code identifier Code ID corresponding
to each barcode type can be modified according to application requirements.
To Next Page
Loading...
