Bematech I-500 - Data Terminator Character; Data segment extraction

I-500 Imaging Barcode Scanner
34
PROGRAMMING GUIDE
Data Terminator Character
Scan the following settings to select terminator charater to be added to end of data
output.
None
*CR
Tab
CR & LF
Data segment extraction
If the application requires only a part of decoded information, this function can be used
to extract and output a portion of data.
The decoded data is divided into three sections:
[Start] [Center] [End]
The character string lengths of the Start and End data sections can be set up by scanning
the setting barcodes. The user can then choose the required data sections by scanning
the following setting barcodes.