Bematech LB-1000 - Set Back


   

 % !*/ 

Description
This setting is used after SET CUTTER function. This function prevents label backfeeding after a cut.
Syntax
SET BACK OFF/ON
Model Support
LB
-
1000
X
Parameter Description
OFF Disable back function.
ON Enable back function.
Example
REM **SET BACK FUNCTION OFF EXAMPLE PROGRAM**
SIZE 3,1
GAP 0,0
DENSITY 8
SPEED 6
DIRECTION 1
REFERENCE 0,0
SET CUTTER 1
SET BACK OFF
CLS
TEXT 50,50,"3",0,1,1,"SET BACK OFF"
PRINT 3
CLS
SET CUTTER 1
SET BACK ON
TEXT 50,50,"3",0,1,1,"SET BACK ON"
PRINT 3
See Also
OFFSET, PRINT, SET CUTTER
