% ! $
Description
This setting is used to enable/disable the self-peeling function. The default setting for this function is off.
When this function is set on, the printer stops after each label printing, and does not print the next label
until the peeled label is taken away. This setting will be saved in printer memory when turning off the
power.
Syntax
SET PEEL ON/OFF
Parameter Description
ON Enable the self-peeling function
OFF Disable the self-peeing function
Example
REM ***SELF-PEELING FUNCTION ON***
SIZE 4,4
GAP 0,0
DENSITY 8
SPEED 6
DIRECTION 0
REFERENCE 0,0
SET CUTTER OFF
SET PEEL ON
CLS
TEXT 50,100,"3",0,1,1,"SELF-PEELING FUNCTION TEST"
PRINT 5
See Also
OFFEST, PRINT
To Next Page
Loading...
