.
Description
This command will feed label until the internal sensor has determined the origin. Size and gap of the
label should be defined before using this command.
Syntax
HOME
Parameter Description
None N/A
Model
Example
SIZE 4,2.5
GAP 2 mm,0
SPEED 4
DENSITY 7
DIRECTION 0
OFFSET 0.00
REFERENCE 0,0
SET PEEL OFF
SET CUTTER OFF
SET COUNTER @0 +1
@0="000001"
HOME
CLS
BOX 1,1,360,65,12
TEXT 25,25,"3",0,1,1,"HOME COMMAND TEST"
TEXT 25,80,"3",0,1,1,@0
PRINT 3,1
See Also
FEED, SIZE, GAP, BLINE, FORMFEED
To Next Page
Loading...
