%.!
Description
This command moves the label’s vertical position. A positive value moves the label further from the
printing direction; a negative value moves the label towards the printing direction. For a visual
representation, see next page.
Syntax
SHIFT n
Parameter Description
n The maximum value is 1 inch. For 200 dpi printers, the range
is –203 to 203; for 300 dpi printers, the range is –300 to 300.
The unit is dot.
Model Support
Example
SIZE 4,2.5
GAP 2 mm,0
DIRECTION 0
SHIFT 30
OFFSET 0
CLS
TEXT 400,200,"3",0,1,1,"DIRECTION 0"
TEXT 400,250,"3",0,1,1,"SHIFT 30"
To Next Page
Loading...
