% !**"
Description
This setting is used to enable/disable ribbon sensor detection. (Thermal Transfer Printing/Thermal
Direct Printing) Printer will detect the presence of a ribbon to determine using either direct thermal or
thermal transfer printing upon printer startup. This setting will NOT be saved in printer memory.
Syntax
SET RIBBON ON /OFF
Parameter Description
ON Thermal transfer printing
OFF Thermal direct printing
Example
REM ***Direct printing****
SIZE 4,4
GAP 0,0
DENSITY 8
SPEED 6
DIRECTION 0
REFERENCE 0,0
SET CUTTER OFF
SET PEEL OFF
SET RIBBON OFF
CLS
BARCODE 100,100,"39",48,1,0,2,5,"CODE 39"
PRINT 1
To Next Page
Loading...
