Bematech LB-1000 - Set Head

To Next Page

To Previous Page



   



 % !.  

Description

This setting is used to enable/disable head open sensor. If the head open sensor is turned off, an open

printer head will not return an error message. This setting will be saved in printer memory. This

command is only available for BPL2 printers.

Syntax

SET HEAD ON /OFF

Parameter Description

ON Turn on the “HEAD OPEN” sensor

OFF Turn off the “HEAD OPEN” sensor

Model Support

1000

Example

SET HEAD ON

SET HEAD OFF

Other manuals for Bematech LB-1000