Bematech LB-1000 - Page 142


   

 % !$ #F% !$ 8F% !$ 9
Description
This setting is used to control LED on/off function.
Syntax
SET LED1 ON/OFF
SET LED2 ON/OFF
SET LED3 ON/OFF
LED no. Default Function
LDE1 Power on/off
LED2 Printer on-line/off-line
LED3 Erroe/normal
Parameter Description
ON Enable LEDn function
OFF Disable LEDn function
The default function of LED1, LED2 and LED3 id as listed below:
Model
LED1
LED2
LED3
LED2 &
LED3
LB
-
1000
GREEN
GREEN
RED
ORANGE
Example
DOWNLOAD "DEMO4.BAS"
SET LED1 OFF
SET LED2 OFF
SET LED3 OFF
FOR I=1 TO 100
LED1=0
LED2=0
LED3=0
IF I-INT(I/2)*2=0 THEN
LED1=1
ELSEIF I-INT(I/3)*3=0 THEN
LED2=1
ELSE
LED3=1
ENDIF
NEXT
LED1=1
LED2=1
LED3=0
SET LED1 ON
SET LED2 ON
SET LED3 ON
EOP
DEMO4