Bematech LB-1000 - Page 151


   

 % !"!/ , 
Description
This command will print one label and feed label gap to tear bar position for tearing away. Press FEED
button to print the next label or batch of labels. If label content includes serial text or barcode, it will
change the serial number accordingly. This setting will be saved in printer memory.
Syntax
SET PRINTEKY OFF/ON/AUTO/<num>
Parameter Description
OFF Disable this function
ON Enable this function
AUTO Enable this function
<num> Numbers of labels will be printed if FEED button is pressed.
This command is only available for TSPL2 printers.
Model Support
LB
-
1000
X
Example
Execute:
SIZE 4,2.5
GAP 0.12,0
SET PRINTKEY ON
SET COUNTER @0 1
@0="0001"
CLS
TEXT 10,10,"5",0,1,1,@0
PRINT 1
Execute:
Syntax Receive “PRINT m” Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT 2
Label 1~2
2.) Press FEED key
Label 3~4
Syntax Receive “PRINT m,n” Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT 1,2
Label 1, Label 1
2.) Press FEED key
Label 2, Label 2
Syntax Receive “PRINT -1,n” Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT
-
1,2
Label 1, Label 1
2.) Press FEED key
Label 1, Label 1