Bematech LB-1000 - Page 155


   

 $ #F$ 8F$ 9
Description
This command is used to control LED on/off. This attribute is write-only. Specify 1 to light on LED and 0
to turn off LED. Before using this command, be sure to cancel the default LED functions. Please refer to
the SET LED command.
Syntax
LEDm = n
Parameter Description
m m=1, LED1
m=2, LED2
m=3, LED3
n 0: turn off LED
1: light on LED
Model
LED1
LED2
LED3
LED2 & LED3
LB
-
1000
GREEN
GREEN
RED
ORANGE
Example
DOWNLOAD "DEMO.BAS"
SIZE 3,3
GAP 0.12,0
SPEED 4
DENSITY 8
DIRECTION 1
REFERENCE 0,0
SET CUTTER OFF
SET PEEL OFF
SET LED1 OFF
SET LED2 OFF
SET LED3 OFF
LED1=0
LED2=1
LED3=0
EOP
