Bematech LB-1000 - Page 32


   

 */ 0*/+ 
Description
This command feeds the label in reverse. The length is specified by dot.
Syntax
BACKUP n (TSPL printers only)
BACKFEED n (TSPL2 printers only)
Parameter Description
n unit: dot
1  n  9999
Note : 200 DPI : 1 mm = 8 dots
300 DPI : 1 mm = 12 dots
Model
Sup
port
BACKUP
BACKFEED
LB
-
1000
X
X
CAUTION: Impropriety back feed value may cause paper jam or wrinkle.
Example
BACKUP 40
BACKFEED 40
See Also
FEED, SIZE, GAP, BLINE, HOME, FORMFEED
