-
"$
Description
"DOWNLOAD" is a header of the file that is to be saved in the printer's memory. The downloaded files
can be divided into two categories: program files and data files (including text data files, PCX graphic
files and bitmap font files) The detailed descriptions regarding the download syntax for different files are
as follows:
Maximum numbers of file saved in DRAM:
50 files for LB-1000 language printers.
Maximum numbers of file saved in Flash memory:
256 files for LB-1000 language desktop printers
Model
card capacity
If "AUTO.BAS" exists in the printer memory, it will be automatically executed upon printer
startup. To disable the auto execution function, please follow the procedures below.
For LB-1000 series
Hold the FEED key and power on the switch. The LED color will be changed as following pattern.
Orange
red (5 blinks)
orange (5 blinks)
green (5 blinks)
solid green (for firmware
version before V3.37)
Orange
red (5 blinks)
orange (5 blinks)
green (5 blinks)
green and orange (5 blinks)
red and orange (5 blinks)
solid green (V3.37)
Release the FEED key while LED becomes solid green to prevent the printer from running
“AUTO.BAS”.
Syntax
1. Download a program file:
DOWNLOAD [n,] "FILENAME.BAS"
Parameter Description
n Specify memory used to save downloaded files.
n is ignored: Download files to DRAM only. If you would
like to save the files from DRAM to Flash memory before
turning off power, issue the MOVE command to printer.
F: Download files to main board flash memory.
E: Download files to expansion memory module.
FILENAME.BAS The filename resident in printer memory.
To Next Page
