3
MP-2100 TH · Revision 1.1
EMC and Safety Standards Applied
Product Name: MP-2100 TH
Model Name: All
*EMC is tested using an EPSON PS180 power supply
Europe:
CE marking
Safety: EN60950
North America:
EMI: FCC Class A
WARNING
Unauthorized changes or modifications on the equipment could void the certifications described in this page.
Please contact your dealer for further information.
CE Marking
The printer conforms to the following Directives and Norms:
Directive 89/336/EEC
EN 55022 Class B (Conducted and Radiated emission)
EN 55024
IEC 61000-4-2 ESD
IEC 61000-4-3 Radiated immunity
IEC 61000-4-4 EFTB
IEC 61000-4-5 Surge
IEC 61000-4-6 Conducted immunity
IEC 61000-4-11 Voltage Dips
FCC CLASS A
DECLARATION OF CONFORMITY
This equipment has been tested and found to comply with the limits for a Class A digital service,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, use and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to the radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
To Next Page
Loading...
Need help?
General
