Bematech MP-4000 User Manual

User’s Manual
6
Preface
This manual assists you with the installation, configuration and usage of this Bematech product.
1. Who should read this manual?
This manual is intended for use by persons who are installing, using or testing the product.
The manual should also be used for product troubleshooting.
2. How this manual is organized?
Chapter 1 - "Getting Started" provides an overview about the product.
Chapter 2 - "Setting Up Your Product" provides information on installing and configuring the
product.
Chapter 3 - "How To Use Your Product" provides information on using the product effectively.
Chapter 4 - "Troubleshooting" provides information on testing and identifying simple solutions
to the most common problems.
Chapter 5 - "Technical Specifications" provides technical information about the product.
3. Related publications and software
- Quick Start Guide
- Programmer's Manual
- Drivers and APIs
These contents are available at our website.
4. Where to find more information
English contents in http://www.bematech.com
Spanish contents in http://www.bematech.com/es
Portuguese contents in http://www.bematech.com.br

Bematech MP-4000 Specifications

General

Auto Cutter	Yes
Printing Method	Thermal
Print Speed	250 mm/s
Paper Width	80 mm
Interface	USB, Serial, Ethernet
Connectivity	USB, Serial, Ethernet
Humidity	80% RH