16
OS Selection
The optional settings: [Windows 8.X]; [Android]; [Windows 7].
* Note: User need to go to this item to select the OS mode before installing
corresponding OS driver, otherwise problems will occur when installing the driver.
ACPI Settings
Press [Enter] to make settings for the following sub-item:
Enable Hibernation
ACPI Sleep State
EUP Function
Wake-Up by PCIE/LAN from S5
Wake-Up by PS/2 Keyboard
Wake-Up by PS/2 Mouse
PWRON After PWR-Fail
RTC WakeUp
Super I/O Configuration
Press [Enter] to make settings for the following sub-items:
Serial Port 1 Configuration
Serial Port 2 Configuration
Serial Port 3 Configuration
Serial Port 4 Configuration
Serial Port 5 Configuration
Serial Port 6 Configuration
Parallel Port Configuration
WatchDog Timer
WatchDog Timer Value
WatchDog Timer Unit
H/W Monitor
Press [Enter] to view current PC health status & system working status and make
settings for the following sub-items:
CPUFAN Smart Mode
CPUFAN Full-Speed Temperature
CPUFAN Idle-Speed Temperature
CPUFAN Full-Speed Duty
CPUFAN Idle-Speed Duty
CPU Configuration
Press [Enter] to view current CPU configuration and make settings for the following
sub-items:
Active Processor Cores
Limit CPUID Maximum
Execute Disable Bit
Hardware Prefetcher
To Next Page
Loading...
