EasyManuals Logo

Bematech SB1015 User Manual

Bematech SB1015
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
3
screen. Wipe it clean with a soft terry cloth applied with a mild solution
Do not share the same power outlet with high-power electrical appliances;
keep distance from high level magnetic interference.
Do not the use sharp pointed objects to work with the touch screen to avoid
damage to the screen.
When the following occurs:
Liquid gets inside the POS terminal;
Accidental physical damage;
The power cord or plug is damaged;
POS terminal produces a burning smell;
Immediately disconnect the power supply, unplug the power cord, and contact a
qualified service technician.
1.2 Electromagnetic compatibility statement
FCC NOTICE
This device complies with Part 15 of FCC Rules. Operations are subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
EUROPEAN COMMUNITY (CE) MARK OF CONFORMITY
This product is in conformity with the protection requirements of EU Council
Directive 89/336/EEC on the approximation of the laws of the Member States
relating to electromagnetic compatibility. Bematech / Logic Controls cannot
accept responsibility for any failure to satisfy the protection requirements
resulting from a non-recommended modification of the product. This product
has been tested and found to comply with the limits for Class A Information
Technology Equipment according to CISPR 22 / European Standard EN 55022.
The limits for Class A equipment were derived for commercial and industrial
environments to provide reasonable protection against interference with
licensed communication equipment.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bematech SB1015 and is the answer not in the manual?

Bematech SB1015 Specifications

General IconGeneral
Processor cache2 MB
Processor cores4
Processor modelJ1900
Processor familyIntel® Celeron®
Processor frequency2 GHz
DC-in jackYes
Serial ports quantity3
USB 2.0 ports quantity5
Ethernet LAN (RJ-45) ports1
Operating system installed-
Display diagonal15 \
Display brightness250 cd/m²
Display resolution1024 x 768 pixels
Touchscreen technologyResistive
Internal memory8 GB
Memory slots typeSO-DIMM
Memory clock speed1333 MHz
Internal memory typeDDR3L-SDRAM
Power supply90 W
AC input voltage100-240 V
AC input frequency50 - 60 Hz
HDD size2.5 \
HDD interfaceSATA
Storage mediaHDD
Total storage capacity320 GB
Graphics cardHD Graphics
Graphics card manufacturerIntel
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)8 - 80 %
Audio systemALC887
Ethernet LAN data rates10, 100, 1000 Mbit/s
Chassis typeAll-in-One
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)230 mm
Width (with stand)364 mm
Height (with stand)326 mm
Weight (with stand)5910 g

Related product manuals