15
2. Programs and intensity levels
The control devices B.BOX Professional offer 10 different inten-
sity levels and three pre-defined programs. The intensity levels
are applied during the generalized local treatment according to
the basic plan, while the programs P1 – P3 are carried out in a
step-by-step manner within the scope of the local treatment.
The existing, predefined programs cover the wide range of
application requirements needed for daily use.
Frequency of application
Whenever possible, BEMER therapy should be carried out on
a daily basis. Intermittent applications mean a lessened effect,
resulting in longer application durations.
There is no hard and fast rule for the distribution of applications
throughout the day. It depends on the therapy goal and the
situation of the individual user.
•
For prevention, maintaining overall health, and supporting the
body’s performance, we recommend to use two applications
a day following the Basic Plan on page 17.
•
To treat acute stimulation targeted with the application
module, we recommend the additional use of 2-3 local appli-
cations with the programs P1-P3 additionaly to the basic
Plan. Overdosing or habituation effects from using the BEMER
system are not known.
•
At home, applications can be customized according to the indi-
vidual’s situation and needs. If possible, a treatment should be
performed both in the morning and in the evening.
•
At the doctor’s office or therapeutic practices, it is usually possi-
ble to have only one application per day. Usually this consists of
a local treatment with the B.PAD and, when necessary, this is
immediately followed by another treatment with an applica-
tion module for localized treatment (double treatment).
•
Do not use two different local treatments at the same time,
on the same user.
1960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 151960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 15 04.11.2020 08:47:2704.11.2020 08:47:27
To Next Page
Loading...
