36
•
Remove the adapter from the power supply.
•
Repeat the cleaning procedure at regular intervals.
Observe the safety notes.
•
Do not use abrasive, alkaline, or acidic cleaning agents.
•
Do not use sharp or pointed objects.
•
For cleaning and disinfection, we recommend using
mikrozid® universal liquid from Schülke.
•
Solutions containing a small amount of alcohol can be
used for quickly disinfecting medical products based
on the same active substances. Please follow the
manufacturer’s instructions for use in the product
data sheet.
•
Ensure that liquid does not enter the devices during
cleaning and disinfection.
Cleaning
Components:
B.BOX // B.GRIP // B.SPOT
•
BEMER devices and the associated components are neither water-
proof nor protected against spray water. For this reason, the housing
parts must be cleaned or disinfected with a slightly damp cloth.
B.PAD
•
The components are not washable.
•
To clean and disinfect them, evenly spray the surfaces with a cleaning/
disinfection agent and follow the manufacturer’s instructions with
regard to exposure time. Next, wipe them with a soft, non-abrasive
cloth.
B.GRIP fixing band // B.PAD cover
•
Machine wash up to 30 °C with mild detergent
•
Do not machine dry
1960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 361960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 36 04.11.2020 08:47:3104.11.2020 08:47:31
To Next Page
Loading...
